Slitting machine, we will carry out through some specific problems, because this is also part of its knowledge system, but also must be understood and mastered, otherwise it is not good to carry out the comprehensive learning of this product.
Then, since it is to answer the question, then the following is in the form of a question and answer to expand specifically, so that it can be clearly understood and convenient for everyone to learn and master.
1. Is the processing effect of slitting machine equivalent to that of cutting machine?
Slitting machine and cutting machine, they have similarities, are used to divide materials, but if the cutting machine is used for slitting, then its work efficiency is low. Moreover, cutting with a slitting machine can only be simple, and its processing accuracy is not as good as that of a cutting machine.
2. What is the material of the rubber partition sleeve on the slitting machine?
The rubber spacer on the slitting machine is mainly made of nitrile rubber or polyurethane.
The automatic high-speed slitting machine can increase the production capacity by more than 50% through the following technical solutions.
02. April, 2025
Ensure that the material is always in the correct position during the slitting process to avoid mistracking or cutting errors.
02. April, 2025
Here are the key points for the ultimate solution to double the slitting efficiency of hot foil stamping foils:
02. April, 2025
Install automatic deviation correction system to reduce manual adjustment time.
01. April, 2025
The core lies in the collaborative optimization of mechanical stability, dynamic control accuracy and intelligent compensation.
01. April, 2025
