
The slitting machine is mainly to cut the large drum mother roll into products of different widths, and can have the role of checking the quality of the product.
Key features:
1. Unwinding photoelectric deviation correction, high precision, control mode is divided into two gears: manual gear and automatic gear
2. There can be two winding methods: surface winding and center winding;
3. The tension of rewinding and unwinding adopts automatic tension control, and the control mode includes tension feedback control and taper control.
4. There are two kinds of slitting knives, round knife cutting and air knife cutting, with reliable quality and easy adjustment;
5. The surface center is used for coiling, and the coiling quality is uniform and stable;
6. Automatic shutdown of fixed length, automatic meter counting of length;
7. It has an edge cutting device, and the edge material is discharged by the fan;
8. It is suitable for the slitting of narrow strips (insulating materials, mica tapes, films, etc.) of various thin coils.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026