News

1. Technical specifications;Use a power source-pressurized air-Slitting material-Slitting raw material diameter-Slitting width-Slitting speed-Dev

For the paper processing industry, the tape slitter is a very important equipment, almost every day to use this equipment, if the failure will hi

First, the use environment requirements of the slitting machine:The machine should be installed in a place with appropriate temperature, dry, ven

Regrinding slitter blades1. In the process of using the slitter blade, due to the long-term anti-extrusion with the plate, it is easy to lead to

Tape slitting machine is a tape processing tool used to cut the tape according to a certain size, using which we can cut the tape according to an

In the process of using the slitting machine, the essence of constant tension control in the winding and unwinding process should know the change

The operation control system of the slitting machine is to use a large motor to drive the shaft of the rewinding and unwinding, adding a magnetic

First, first of all, we must look at the degree of automation of the rewinder, the higher the degree of automation, the more intelligent the bett

1. During the operation of the slitting equipment, if the tool has the problem of lateral swaying, it will lead to poor scale, such as the latera

1. First fold out the upper knife, adjust to the required size and put it back into the lower knife, and then adjust the upper knife adjustment b