Before use, the main components of the slitting machine should be inspected and filled with lubricating oil; When inspecting the disassembly and slitting machine, it is strictly forbidden to use inappropriate tools and unscientific operation methods; Complete cleaning and inspection of the machine every two weeks; If the slitting machine is not used for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic sleeve to cover the whole machine. If the slitting machine is out of service for more than 3 months, it should be covered with moisture-proof paper on anti-rust oil; After the work is completed, carefully clean the equipment, wipe the exposed friction surface clean, and fill it with lubricating oil.

Daily maintenance of slitting machine:
1. The electrical parts should be cleaned and inspected regularly to remove hidden dangers in time.
2. The use of slitting machine is completed by longitudinal cutting machine and cross-cutting machine, so high-quality longitudinal cutting knives and cross-cutting knives should be used.
3. The daily maintenance of the slitting machine should be in place, and its criterion is that smooth, clean, and liquidated (dust-free, no debris) are in place to ensure that the sliding part of the equipment is in good condition.
4. For maintenance work, stop regular and irregular inspection of rotating parts (especially for wearing parts, stop real-time monitoring). Implement regular adjustment, regular replacement, commutator and make meticulous records to achieve the purpose of extending the service life of the equipment.
5. Improve the technical quality and degree of personnel operating the slitting machine, and the operation of the control part should be carried out by a special person, and no one shall operate it without permission.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026