The operation control system of the slitting machine is to use a large motor to drive the shaft of the rewinding and unwinding, adding a magnetic powder clutch to the retracting and unwinding reel, and controlling the resistance generated by adjusting the current of the magnetic powder clutch to control the tension on the surface of the material.
Magnetic powder clutch and brake is a special automatic actuator, which transmits torque through the magnetic particle filling the working gap, and changes the magnetic current can change the magnetic state of the magnetic powder, and then adjust the transmitted torque. It can be used for stepless speed regulation from zero start to synchronous speed, suitable for high-speed section fine-tuning and medium and small power speed regulation system. It is also used in the unwinding or rewinding tension control system to adjust the torque by adjusting the current to ensure that the tension remains constant during the winding process.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026