For the rewinder, after the processing is completed, it is very important to reasonably stop the work, so what should the rewinder pay attention to when it is stopped? Let's talk to the rewinder manufacturers to find out.
1. Before shutting down, confirm that all finished products are processed to prevent semi-finished products from rolling inside.
2. You can't turn on the machine immediately after the rewinding is turned off, and you have to wait for more than half an hour to turn it on again.
3. When shutting down, you should idle for a few minutes before shutting down, especially in summer. Since the rewinder is in continuous operation, the temperature of the machine itself is very high, and idling for a few minutes can effectively dissipate heat and reduce damage to the toilet paper rewinder.
Therefore, when the rewinder is stopped, it needs to be carried out in the correct way to ensure the good performance of the rewinder.
The multi-functional all-in-one slitting and rewinding machine integrates slitting, rewinding...
23. April, 2025
Install automatic deviation correction system to reduce manual adjustment time.
01. April, 2025
The key is to dynamically adjust parameters based on material properties and production requirements, and to maintain equipment stability.
28. March, 2025
The following is a detailed analysis of the production efficiency of the rewinder:
21. December, 2024
Maintaining the hot stamping foil slitting and rewinding machine is an important measure to ensure its long-term stable operation, improve production efficiency and product quality.
21. December, 2024
