In the process of using the slitting machine, there is a lack of pressure, and it is very important to adjust it in time, so what are the reasons for the insufficient pressure of the slitting machine?
1. Whether there is leakage in the oil cylinder; The oil cylinder is one of the more important pressure actuators, and a good way to judge whether the oil cylinder has leakage is; Let the machine stand still and see if the workbench is slowly sliding.
2. Oil pump; The oil pump is the source of pressure for the whole machine, if the oil pump is damaged, leaking, leaking, etc., it will cause the oil pump to output insufficient rated pressure.
3. There should be pressure to ensure that there is no pressure leakage in the system, that is, there is no damage or oil leakage in the pipeline, hydraulic valve, joint and other components.
Therefore, remember that in the process of use, if there is a lack of pressure, it should be solved in time to ensure its good performance.
An efficient and accurate hot stamping foil slitting machine is the key to breaking this dilemma.
10. September, 2025In today's era of sustainable development and refined operations, the printing industry is undergoing a profound green revolution.
10. September, 2025Below I will elaborate on why the foil stamping slitting machine is a "profit growth point that you may not know" from several aspects.
10. September, 2025Its core value is to transform mass-produced standardized master rolls into personalized and diversified specifications required by the market.
09. September, 2025This guide will take you through an in-depth analysis of the causes of the problem and systematically provide you with the selection strategy for modern slitting machines.
09. September, 2025