
The slitting machine is a processing equipment that slits and rewinds wide web paper into rolls of different widths and diameters. It is widely used in the processing industry or pre-press and post-press machinery and equipment.
Performance and characteristics
1. The slitting machine is controlled by PLC and touch screen, magnetic powder clutch tension control, and center winding mode.
2. The main engine is the use of frequency conversion speed regulation, can automatically count meters, alarm shutdown, tension numbers are all displayed on the touch screen.
3. Unwinding adopts photoelectric automatic deviation correction (or ultrasonic correction) to correct the edge neatly, so that irregular materials can be cut normally.
4. Round knife (or straight knife) slitting, waste edge automatic discharge device.
5. Manual (or pneumatic) feeding unwinding shaft with taper sleeve inflatable shaft (3" or 6").
6. The winding adopts A and B shafts (inflatable type).

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026