1. Preparation - Confirm the film cutting specification and quantity - Check the status of the film cutter and rewinding shaft, clean and lubricate if necessary - Place the film roll on the material shaft and align the film end with the idler.
2. Set the cutting parameters - according to the nature and specifications of the film, set the cutting speed, pressure and other parameters - set the counter according to the length and quantity of the film
3. Start the automatic mode - check if the individual parts are working properly and ensure safety - activate the automatic mode of the machine and start cutting.
4. Monitor the cutting process - monitor the running status of the machine, especially when the film is rolled to a certain length, pay attention to the timely replacement of the material shaft - check whether the quality of the cut meets the requirements at any time, and adjust it as needed.
5. Cutting Completed - When the quantity that needs to be cut reaches the number set by the counter, it will stop automatically - turn off the power of the machine, clean up the cutting waste and cutting knife.
6. Maintenance - Regularly clean the machine, especially the cutting knife and rewinding shaft - oil injection or lubrication to maintain each part to prolong the service life of the machine.
The following are the key points of adaptation and optimization suggestions for key parameters:
24. July, 2025Through systematic design, standardized interfaces and refined debugging, the integration level of the film slitting production line can be significantly improved.
22. July, 2025The following are the core paths and technical details of the film slitting machine to improve production efficiency:
19. July, 2025The following is a complete operation process manual of the film slitting machine from start-up to slitting parameter setting for reference:
18. July, 2025The following is analyzed from three dimensions: technology integration, industry applications, and future trends:
17. July, 2025