
Safety Hazards:
There are some details that need to be paid attention to during production to avoid accidents.
1. Ensure the correct stability of voltage, current, and hydraulic equivalence before starting.
2. Before the machine is ready to run, all personnel must keep a certain safety distance from the machine to ensure personal safety before starting and running.
3. When the slitting machine is running, do not touch the film roll and roller core in operation with your hands, so as not to roll your hands in, and do not touch the blade to avoid cuts.
4. Do not scratch with a knife or hard object, and cut the core of each roller.
5. In case of emergency during operation, the emergency stop button should be pressed immediately, and then the abnormality should be handled.
Improvement measures:
1. Adjust the tension, increase the contact pressure, and limit the amount of air involved.
2. Improve the quality of composite film rolls.
3. Adjust the tool or replace the blade.
4. Reduce the slitting speed, especially when slitting materials that are easy to slide.
5. Slow down or accelerate.

accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026
Below is a summary of the full-process operating standards from startup preparation to finishing based on equipment characteristics and process requirements.
07. November, 2026
Ribbon slitting and rewinding is a key process in the production of thermal transfer consumables, and its efficiency directly determines delivery cycles and cost competitiveness.
07. November, 2026
Its application scenarios go far beyond ribbon production workshops and span the entire consumables supply chain from manufacturing to end users.
07. November, 2026