
The slitting machine is mainly for the processing of paper, and it is very important to be accurate in the cutting process, but after a long time in the cutting process, there will be inaccurate cutting, and deviation occurs in the working process, which is also more common.
1. Check the slitting moral meshing in the replacement specifications.
2. Check whether the tension of the paper web is uniform, if the tension of the paper web is not good, adjust the longitudinal motor to adjust the tension of the paper web.
3. Increase the wrapping angle of the stretching roller, and adjust the air bags of the multi-stage roller so that the paper roll can be produced normally to avoid deviation.
4. Check whether the slitted paper is tightened when unwinding.
5. Check whether the paper core is deformed, uneven incision and other phenomena.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026