
The slitting machine is mainly for the slitting of paper and film, it is also through the slitting to effectively improve the work efficiency, but there will be a lot of details to know when running and controlling, let's talk about the operation details of the slitting machine.
1. Before the machine is ready to run, all personnel must keep a certain safety distance from the machine to ensure personal safety before starting and running.
2. Do not scratch with a knife or hard object, and cut the core of each roller.
3. When the slitting machine is running, do not touch the running film roll and roller core with your hands, so as not to roll your hands in, and do not touch the blade to avoid cuts.
4. In case of emergency during operation, the emergency stop button should be pressed immediately, and then the abnormality should be handled.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026