
We know that there are a lot of specifications for the use of slitting machines, among which we need to understand the fixed length specifications, and we must correctly understand the fixed length specifications in use, so let's talk about what are the fixed length specifications of the slitting machine?
In order to carry out the production and processing of the whole roll or the whole sheet of raw materials, such as plastic packaging materials, carton packaging, thick steel plates, films, leather products, wood, etc., it is necessary to use the fixed-length segmentation operation of the slitting machine.
Fixed-length segmentation operations are divided into two types: static and dynamic segmentation: the device is accurately shut down when the length is set, and then the static data is segmented for production and processing, and the operation is restarted after segmentation; When the length of the setting arrives, the splitting data signal is not turned off, and the slitting machine dynamically divides the production and processing in the whole process of raw material fitness movement.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026