Learn how slitters are managed

The use of slitting machine for the processing of paper still has a very good effect, which for the management of the slitting machine we still have a general understanding, let's talk about how the slitting machine is managed.

1. The post personnel should pay attention to the slitting quality of the product, check the width, roll length and other indicators, and fill in various quality records as required.

2. The operator must be familiar with the performance of the machine and carry out the production operation in strict accordance with the methods specified in the equipment manual. To keep the slitting machine clean and tidy, it is strictly forbidden to place tools or supplies on the machine.

3. During the work, it is necessary to pay attention to observe the running status of the unwinding end of the cloth roll, if the system does not have the function of "automatic deceleration and shutdown in advance", it is necessary to reduce the speed and stop the machine in advance before the cloth roll is about to be exhausted.

4. It is necessary to confirm that the personnel and equipment are in a safe state before starting the slitting machine, the acceleration process should be stable, and the operators and post personnel should communicate and coordinate with each other.

5. The slitting knife can only be installed or replaced after the machine stops rotating and the power is turned off. When adjusting the position of the slitter during operation, someone should supervise it on the worktop. The replaced slitting tools should be collected and stored in a centralized manner and placed in the designated location.