
The slitting machine is an important operating machinery, and in order to play its role, it is very important to operate the slitting machine reasonably, so what are the requirements for the operation?
1. The important performance indicators of fixed-length slitting are slitting accuracy, and the length consistency of the finished product is good.
2. Fixed-length slitting control is divided into static and dynamic slitting: stop accurately when the set length arrives, then static slitting processing, restart the operation after slitting; when the set length arrives, the slitting signal is sent without stopping, and the slitting machine dynamically slits during the material movement.
3. The slitting length can be set continuously, if there is an error in the actual slitting length, it is easy to calibrate by setting the parameters.
4. The slitting machine should use fixed-length slitting control for the whole roll or the whole sheet of raw materials, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc.
Therefore, when the slitting machine is operating, it is necessary to do these details well to ensure its good performance.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026