
After the improvement of the slitting machine control system, the benchmarking operation is simple, and the photoelectric sensor will automatically locate the color code, and no longer need to be moved manually. Single-layer products can also use color mark counting, lighting and power saving function.
Improvement measures for the control system of the slitting machine:
1. The slitting machine can use a counter to achieve the alignment of the color mark at one time. The exhaust fan is automatically turned on synchronously. The program adopts fuzzy logic operation benchmarking technology, which can confirm the accuracy of 100%.
2. Intelligent Label Removal Cylinder: The cylinder will be opened according to the size of the label withdrawal distance, which can ensure the stability of the lower coil tension when the slitting machine starts, and can effectively prevent the paper biting phenomenon caused by tension shaking when starting.
3. Benchmarking will no longer be limited by speed, and can achieve accurate benchmarking at full speed, which can change the status quo that the original slitting machine equipment can not exceed 25 meters when producing benchmarking products, which greatly improves the production capacity.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026