The daily maintenance of the slitter is the key to ensure its stable operation and prolong its service life. Here are some of the main items for the daily maintenance of the slitting machine:
1. Cleaning and inspection
1. Regular cleaning: Regularly clean the surface and interior of the slitter, especially the cutters, guide rollers, transmission parts and other places that are easy to accumulate dust and dirt. Use appropriate cleaners and tools, and avoid using chemicals that may cause damage to the equipment.
2. Check the tool: Check the wear of the tool and replace or grind it if necessary. Make sure the knives are sharp and securely fixed to reduce resistance and vibration when cutting.
3. Electrical system inspection: Check the electrical system of the slitting machine, including power lines, motors, switches, etc., to ensure that the electrical connection is good and there is no short circuit or leakage.
2. Lubrication and adjustment
1. Lubricate the transmission parts: Lubricate the transmission parts of the slitting machine (such as bearings, chains, gears, etc.) regularly to reduce friction and wear and improve the operation efficiency of the equipment.
2. Adjust parameters: According to the production needs, adjust the cutting speed, tension, angle pressure and other parameters of the slitting machine in a timely manner to ensure the cutting quality and efficiency.
3. Fastening and replacement
1. Check the fasteners: Check and tighten all loose screws and fasteners to ensure the stability and safety of the device.
2. Replace wearing parts regularly: According to the use of the equipment and the manufacturer's recommendations, replace wearing parts regularly, such as blades, guide rollers, etc., to reduce equipment failure and downtime.
4. Preventive maintenance
1. Develop a preventative maintenance plan: Develop a preventative maintenance plan based on the use of the equipment and the manufacturer's recommendations, including regular replacement of wearing parts, inspection of electrical components, etc.
2. Record the maintenance situation: Establish maintenance records, record the time, content, problems and solutions of each maintenance in detail, so as to follow up and analyze.
5. Training and awareness-raising
1. Train operators: Regularly train operators to improve their operation skills and maintenance awareness, and ensure that they can operate the slitting machine correctly and safely.
2. Enhance maintenance awareness: Emphasize the importance of daily maintenance to ensure that operators can carry out daily maintenance of equipment in accordance with the prescribed procedures and steps.
To sum up, the daily maintenance items of the slitter machine cover many aspects such as cleaning and inspection, lubrication and adjustment, tightening and replacement, preventive maintenance, and training and awareness raising. By carrying out these maintenance items on a regular basis, you can ensure the stable operation and prolonged service life of the slitter.
Flash, staggering and tension control problems that occur during ribbon slitting can have a direct impact on product quality and production efficiency.
03. July, 2025Maintain the dynamic stability of the tension of the coil during the slitting and rewinding process, and avoid the tensile deformation or relaxation and wrinkling of the material.
03. July, 2025With the development of Industry 4.0, traditional film slitting machines are facing the need for intelligent upgrading.
03. July, 2025As the core equipment of film processing, the technological evolution of film slitting machine is directly related to product quality and production efficiency.
02. July, 2025As an important process link in the packaging and printing industry, hot stamping foil slitting technology has experienced decades of development and evolution.
02. July, 2025