Slitting machine is widely used in non-woven fabrics, mica tape, insulation materials and various film material slittering, especially suitable for narrow strip slitting. Today, let's take a look at the adjustment of the pressing device of the slitting machine.
The height and low position of the pressing device of the slitting machine should be adapted to the thickness of the cut book. By adjusting a pair of bevel gears, the pressing device can be raised or lowered, and the pressing device of the base paper slitter can be tightened after the book pressing is tightened. When adjusting the book pressing device, it should be noted that the tightness is moderate, and too loose will cause the book to jump.
The main feature of the slitting machine is that the magnetic powder clutch is used as a resistance device, and a DC voltage is output through system control to control the resistance generated by the magnetic powder clutch. The main advantage is that it is a passive device that can control less tension.
When the slitting machine pressing device is adjusted, we can adjust our machinery according to the above adjustment method, and the correct operation and use of our mechanical pressing device are all we need.
If more detailed information or specific technical parameters are needed, further explanations can be made.
04. July, 2025The following are the application and technical points of film slitting machine in lithium battery separator slitting process:
04. July, 2025Choosing ribbons with high slitting accuracy and good edge treatment can significantly improve printing efficiency and barcode reliability.
04. July, 2025Flash, staggering and tension control problems that occur during ribbon slitting can have a direct impact on product quality and production efficiency.
03. July, 2025Maintain the dynamic stability of the tension of the coil during the slitting and rewinding process, and avoid the tensile deformation or relaxation and wrinkling of the material.
03. July, 2025