Analysis of the treatment method of the rewinding fault of the high-speed slitting machine

High-speed slitting machine because of the mechanical operation rate is relatively fast, so it is called high-speed slitting machine, many paper factories are using high-speed slitting machine to process paper, processing efficiency and labor for a certain improvement, but long-term work will appear some common faults, winding fault is more common, let's talk about the high-speed slitting machine rewinding fault what is the solution?

1. Wrinkles occur when semi-finished products are wound, and the pressure of the tension cylinder can be appropriately increased;

2. When the center of the semi-finished product is relaxed, it is closely related to the uneven gluing and uneven substrate, at this time, the bow roller should be adjusted to flatten it, or the tension of the unwinding shaft should be increased, and the substrate should be compacted with a knife tube.

3. When the coiled products are rolled out, whether the tension of the coiling shaft is too tight, or whether it is closely related to the glue when gluing;

However, what should be done if there is a sudden power outage in the processing plant area instead of a mechanical operation during normal operation?

1. Immediately sort out the paper in the paper slitting machine, because of the sudden power failure, there is a part of the residual paper in the machine, in order to prevent the residual paper from being left in the paper slitting machine and affecting the future production.

2. Intercept the power switch in time to prevent sudden calls and unnecessary damage.