High-speed slitting machine because the mechanical operation is relatively fast when working, the efficiency will also be improved, for the high-speed slitting machine for many factories are to see its figure, especially for the processing of paper, the high-speed slitting machine can play a better effect, let's talk about the factors that affect the efficiency of the high-speed slitting machine?
In the slitting process, the stable tension system is an important indicator to ensure product quality, which controls the mutual tension between unwinding, traction, slitting, rewinding, etc., so that the slitting material is always in a stable state in the slitting process. If the tension is properly controlled, the deformation and drift of the raw material in the process of increasing and decreasing the speed of the machine can be avoided. Generally, the unwinding tension is slightly greater than the sum of the winding shaft tensions.
In this way, if the non-operation occupies a long time, such as: machine adjustment, tool setting, tool change, material change, joint, roll change, processing problems and other long time, it is meaningless to simply improve the speed of the slitting machine. Not to mention the stability of the slitting machine, which will not only affect the working efficiency of the slitting machine, but also affect the product quality, and will cause trouble and unnecessary waste to the next process. So the working efficiency of the slitting machine is a comprehensive concept.
This is mainly due to the increasing requirements for high-performance materials in downstream applications (such as electronics, automotive, aerospace, etc.).
16. July, 2025For special width ribbon processing for customized slitting needs, here are a few possible solutions:
12. July, 2025The pore structure of the separator affects the ion conduction efficiency, and high-precision slitting avoids burrs or deformation at the edges to ensure uniform distribution of pores.
11. July, 2025The following is a technical analysis and key points to achieve high-precision slitting:
10. July, 2025Linear guide rails and crossed roller bearings are used to ensure that the straightness error of the turret movement is
07. July, 2025