
For the slitting machine, reasonable maintenance is very important, daily maintenance can ensure its outstanding function, so how to do a good job in the maintenance of the slitting machine?
1. The daily maintenance of the slitting machine should be in place, and its rope ruler is lubrication, cleaning, and liquidation (no dust, no debris) in place to ensure that the sliding parts of the equipment are in outstanding condition.
2. The electrical parts should be cleaned and inspected regularly, and the hidden dangers should be cleaned in time.
3. Improve the skill quality and degree of the personnel who operate the slitting machine, and the operation of the control part should be done by a special person, and no one shall operate it by himself without permission.
4. The use of slitting machine is completed by slitting machine and cross-cutting machine, so high-quality slitting knife and cross-cutting knife should be used.
5. Conduct a comprehensive arrangement and inspection of the machine every two weeks; If the slitting machine is not required to be stopped for a long time, all the bright surfaces must be scrubbed clean, coated with anti-rust oil, and covered with a plastic sleeve to hide the whole machine. If the slitting machine has been out of service for more than 3 months, it should be covered with moisture-proof paper on the anti-rust oil; After the operation is completed, the equipment is carefully cleaned, the exposed friction surface is scrubbed, and the lubricating oil is filled.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026