
The slitting machine is still very good for the slitting effect of paper, we also have to do the slitting correctly, we also have to be familiar with the common problems, and we also have to understand the common reasons why the slitting machine can not work normally.
1. Brake device. In order to save money, some manufacturers use the circuit brake principle, that is, the upper and lower limit sensors cut off the power supply of the cutter motor, which may cause extremely dangerous conditions such as "slipping knife" in the case of sudden power failure, loose socket, sensor failure, etc. In order to prevent this from happening, it is necessary to use a motor assembly with a mechanical brake device, so that no matter what circuit failure occurs, the motor is locked and accidents are avoided.
2. The principle of operation of double button press. This requires both buttons to be pressed at the same time, otherwise the cutter motor will not act, which can ensure the absolute safety of single operation.
3. The above are the safety factors that affect the use process, so in the maintenance and maintenance, it is necessary to pay attention to the replacement of the blade, use the knife holder to ensure that the blade edge is closed, which not only ensures the safety of people, but also ensures that the blade is not damaged.

no need to buy a dedicated machine or gamble on a mismatched machine just because of a rushed resin-based washing order.
16. November, 2026
This article will start from symptom classification and provide a solution approach that progresses from simple to complex and can be quickly implemented.
16. November, 2026
As a result, a well-calibrated high-precision ribbon slitting machine can stabilize width tolerances within ±0.05mm, and reduce the defect rate from 2% to 3% of ordinary equipment to below 0.3%.
16. November, 2026
accuracy indicators will move from macro to micro, control logic will shift from experience to algorithms, and equipment roles will move from isolated islands to nodes.
10. November, 2026
The following three application cases reveal the efficiency revolution currently underway in this area.
09. November, 2026